Shopping Cart Contents

Return to Previous Page


Barnel Z555P3 2.3-7.5m Telescopic Pole Saw

  • Aluminium pole saw extendable from 2.3m to 7.5m (to centre of blade)
  • Quick release, push button pole and toggle pin enables fast installation/removal of blade from pole
  • Two blade options available – both 460mm SK4 Samurai steel with impulse hardened teeth (no sharpening):
    - Z555B is 5.5mm tooth pitch, 1.4mm thick for aggressive, faster sawing
    - Z550B is finer 4.5mm tooth pitch, 1.5mm thick for less flex/breakage (better for palms)
  • 3 extension (4 section) elliptical pole for greater strength, with positive pin lock every 50cm up the pole length to lock the pole into required position
  • Cushioned handle for prolonged use
  • Raker slots on blade for easier cutting
  • The upper blade sickle is used to cut vines; the lower blade sickle to undercut bark allowing a clean cut without damaging the tree
  • Cuts on pull stroke
  • Includes hard PVC blade sheath
  • Weight 3.3kg without blade, 3.8kg with blade, 4.1kg with blade and sheath
  • We do not recommend using the B555 lopper head on this pole due to the weight of the lopper head and pole
These are currently out of stock with an ETA of 10/8. If you place an order it will not be shipped until approx this date
Barnel Z555P3 7.5m + Z555B$500.00  ETA 10/8
Barnel Z555P3 7.5m + Z550B$500.00  ETA 10/8
  • Spare parts for Barnel Z555P3:
Barnel Z555B Blade$90.00 
Barnel Z550B Blade$90.00 
Barnel Z555P3 Pole Only$420.00  ETA 10/8
Barnel Z555 Blade Toggle Pin$8.00 
Barnel Pole Saw Base Cap$10.00 
Barnel Z555-7A Bottom Pole 7.5m$170.00  ETA 10/8
Barnel Z555-7B Lower Middle Pole 7.5m$135.00 
Barnel Z555-7C Upper Middle Pole 7.5m$125.00 
Barnel Z555-7D Top Pole 7.5m$105.00