Barnel Z555 1.8-5m Telescopic Pole Saw

Aluminium pole saw extendable from 1.8m to 5m (to centre of blade)
Quick release, push button pole and toggle pin enables fast installation/removal of blade from pole
Two blade options now available – both 460mm SK4 Samurai steel with impulse hardened teeth (no sharpening):
- Z555B is 5.5mm tooth pitch, 1.4mm thick for aggressive, faster sawing
- Z550B is finer 4.5mm tooth pitch, 1.5mm thick for less flex/breakage (better for palms)
2 extension (3 section) elliptical pole for greater strength, with positive pin lock every 50cm up the pole length to lock the pole into required position
Cushioned handle for prolonged use
Raker slots on blade for easier cutting
Cuts on pull stroke
Includes hard PVC blade sheath
Weight 1.9kg without blade, 2.4kg with blade, 2.7kg with blade and sheath

Click on image to see further details

Spare parts for Barnel Z555:

Barnel Z555P2 2.3-6.3m Telescopic Pole Saw

Aluminium pole saw extendable from 2.3m to 6.3m (to centre of blade)
Quick release, push button pole and toggle pin enables fast installation/removal of blade from pole
Two blade options now available – both 460mm SK4 Samurai steel with impulse hardened teeth (no sharpening):
- Z555B is 5.5mm tooth pitch, 1.4mm thick for aggressive, faster sawing
- Z550B is finer 4.5mm tooth pitch, 1.5mm thick for less flex/breakage (better for palms)
Cushioned handle for prolonged use
2 extension (3 section) elliptical pole for greater strength, with positive pin lock every 50cm up the pole length to lock the pole into required position
Raker slots on blade for easier cutting
Cuts on pull stroke
Includes hard PVC blade sheath
Weight 2.7kg without blade, 3.2kg with blade, 3.5kg with blade and sheath

Click on image to see further details

Spare parts for Barnel Z555P2:

Barnel Z555P3 2.3-7.5m Telescopic Pole Saw

Aluminium pole saw extendable from 2.3m to 7.5m (to centre of blade)
Quick release, push button pole and toggle pin enables fast installation/removal of blade from pole
Two blade options available – both 460mm SK4 Samurai steel with impulse hardened teeth (no sharpening):
- Z555B is 5.5mm tooth pitch, 1.4mm thick for aggressive, faster sawing
- Z550B is finer 4.5mm tooth pitch, 1.5mm thick for less flex/breakage (better for palms)
3 extension (4 section) elliptical pole for greater strength, with positive pin lock every 50cm up the pole length to lock the pole into required position
Cushioned handle for prolonged use
Raker slots on blade for easier cutting
The upper blade sickle is used to cut vines; the lower blade sickle to undercut bark allowing a clean cut without damaging the tree
Cuts on pull stroke
Includes hard PVC blade sheath
Weight 3.3kg without blade, 3.8kg with blade, 4.1kg with blade and sheath
We do not recommend using the B555 lopper head on this pole due to the weight of the lopper head and pole

Click on image to see further details

Spare parts for Barnel Z555P3:

Barnel B555 Lopper Head for Barnel Telescopic Poles

Professional heavy duty drop forged lopper head
Induction hardened, heat treated blade edge - now Teflon coated for faster cutting & deep anvil hook with self cleaning sap groove for optimum performance
Centre oiler bolt reduces wear
Heavy duty precision coil spring
Deep grove pulley system provides cutting leverage
Strong, durable rope with hardwood handle
Maximum cutting capacity is 40mm for soft, green timber, but for hard or dead wood the maximum cutting capacity is 15-25mm (limited by strength of person cutting). We recommend using the saw blade above for branches larger than 20mm
Includes quick release adaptor for Barnel telescopic poles (Z555/Z555P2)
Also fits Barnel’s new fibreglass poles
Weight 1.8kg (including adaptor)

Click on image to see further details

Package options with B555:

Poles & Blades, see products above - Barnel Z555 and Z555P2

Barnel B177Z Fruit Picking Head for Telescopic Poles

Professional fruit picking head to suit Barnel’s aluminium telescopic poles (Z555/Z555P2) and fibreglass pole sections
Quick release mechanism provides rapid change of heads (lopper/saw/fruit picker) on telescopic poles
Large capacity see through fruit bag
Razor sharp U shaped bypass fruit picking cutter will cut up to 7mm fruit stems and includes 6.3m pull rope
Adjustable bag/cutter angle enables easy access into tight spots
Includes adaptor to suit Barnel aluminium poles
Replaceable bags
Weight - 800g
Available as package deal with Barnel Z555 (1.8-5m) or Z555P2 (2.3-6.3m) aluminium telescopic poles

Spare parts for B177Z:

Silky Longboy 1.45-3.6m Folding Pole Saw

Lightweight (1.95kg) folding pole saw extends from 1.45m-3.6m
360mm blade folds down on pole when not in use, reducing length to 1.4m and allowing pole saw to fit in a boot of a car
Cuts on pull stroke
Aluminium alloy 2-extension pole
New design sheath locks blade on pole for transport
7 teeth / 30mm blade
Made in Japan

Click on image to see further details

Spare parts for Silky Longboy:

Silky Hayauchi 3.7m Pole Saw

3.7m, 1 extension (2 section) pole saw
Upper sickle cuts vines, lower sickle undercuts bark
Cuts on pull stroke
Aluminium alloy extension pole
Adjustable blade to 2 angles
390mm blade length 6.5 teeth / 30mm blade
Includes blade sheath

Click on image to see further details

Spare parts for Silky Hayauchi 3.7m:

Silky Hayauchi 6.3m Pole Saw

6.3m, 3 extension (4 section) pole saw
Upper sickle cuts vines, lower sickle undercuts bark
Cuts on pull stroke
Aluminium alloy extension pole
Adjustable blade to 2 angles
390mm blade length 6.5 teeth / 30mm blade
Includes blade sheath

Click on image to see further details

Spare parts for Silky Hayauchi 6.3m:

Silky Hayate 7.7m Pole Saw

7.7m, 3 extension (4 section) pole saw
Upper sickle cuts vines, lower sickle undercuts bark
Cuts on pull stroke
Aluminium alloy extension pole
420mm special alloy blade. Pitch 6.5 teeth/30mm. 1.8mm blade thickness
Includes blade sheath
Weight 4.5kg (with blade)
Retracted length 2.3m (without blade), 2.8m (with blade)

Click on image to see further details

Spare parts for Silky Hayate:

Green Mountain High Limb Chain Saw

High limb hand operated chain saw for cutting tree branches
Patented 48 inch chain blade which features bimatic carbon steel cutters, engineered for hand use and maximum cutting efficiency as the blade is drawn back and forth
Lightweight, but extremely strong, 25ft polypropylene ropes are attached to each end of the blade and a sandbag throwing weight is attached to one rope end
Works on virtually any timber
Can be easily sharpened with standard chainsaw file
Made in USA

Click on image to see further details

Bahco AP-234 Top Pruner

Aluminium pole pruner enables pruning of small branches up to 4m high
Cuts up to 30mm diameter
Two methods of operation - clearing out and pruning
In clearing out mode, hook the cutting head over the branch and pull the pole down towards you, enabling maximum cutting force
In pruning mode (for small branches), hook the cutting head over the branch and pull the rope down with the orange handle to cut the branch
Lever system provides 50% mechanical advantage for easier cutting
Fully hardened steel blade with slicing action for neat and efficient cut
Length: 2.2m, weight 1.52kg
Made in France

Click on image to see further details

Barnel 1.8-3m Professional Ultra Reach Combo Pruner

1.8-3.0m (6-10’) telescopic 3-in-1 combo pruner
Includes fully removable cutting head, cut-n-hold head and 300mm tri-edge tiger tooth saw
New spring loaded cut-n-hold design that grips foliage/fruits tightly
Centre oiler and ergonomic non-slip handle
Handle rotates for optimum cutting position
Cuts up to 20mm diameter with cut-n-hold removed (green timber)
Weight - 1150g Barnel model B188Z6-10

Click on image to see further details

Spare parts for B188Z6-10:

Barnel B88T 1.8-2.4m Telescopic Lopper

1.8-2.4m telescopic lopper
Cuts up to 40mm diameter
Strong handles with bumper
Telescopic pole with push button adjustment
Shoulder strap supplied for easier use
Barnel model B88T

Click on image to see further details

Spare parts for B88T: