Shopping Cart Contents

Council Tool Fire Rake

  • Professional fire rake designed for construction of fire lines, chopping, raking, moving underbrush, vines etc
  • Comprises 4 triangular shaped tool steel cutting teeth, specially hardened and sharpened
  • Teeth are securely riveted to tough angle iron structural member
  • 1.48m long American ash handle
  • Head size: 31cm wide x 8.5cm high
  • Weight 1.77kg
  • Made in USA by Council Tool Company
  • Click on image to see further details
Fire Rake$110.00 
 

Council Tool McLeod Tool

  • Combination rake and hoe used primarily for clearing brush and other surface debris and for digging in the soil to construct fire control lines
  • High carbon steel blade, formed and sharpened for digging and clawing, and heat treated for toughness and wear resistance
  • Black enamel finish for rust resistance
  • Enhanced ferrule joint for strength and durability on American ash handle
  • Total length 1.2m with 23cm wide hoe, 26cm wide rake; tynes on rake 9cm long
  • Weight 2.75kg
  • Made in USA by Council Tool Company
  • Click on image to see further details
McLeod Tool$180.00 
  • Spare Parts for McLeod Tool:
McLeod Tool Rep Handle$50.00 
 

Council Tool Fire Shovel

  • Professional forest fire shovel, forged from a single piece of high carbon steel
  • Solid shank with forward turned steps for ease of use
  • Heat treated and tempered for toughness and durability
  • Sturdy American Ash handle is driven into socket and riveted
  • Meets US Forest Service specifications
  • Total length 134cm with 27cm long x 23cm wide blade, angled at approx 45 degrees
  • Weight 2.5kg
  • Made in USA by Council Tool Company
  • Click on image to see further details
Council Tool Fire Shovel$160.00 
 

Council Tool Fire Swatter

  • Fire swatter (or fire flail, flap or beater) is used to smother fire, typically used to control or direct flames during controlled burns or in conjunction with mop-up details after fires
  • Flap is 38x31cm and approx 6mm thick, manufactured from masticated rubber
  • Flap is secured to a rectangular steel structure member with a welded stud which is forced into a ferrule, and attached to an American ash handle
  • Total length 1.97m, Weight 2.5kg
  • Made in USA by Council Tool Company
  • Click on image to see further details
Council Tool Fire Swatter$130.00 
  • Spare Parts for Fire Swatter:
Fire Swatter Handle$75.00 
Fire Swatter Flap Only$55.00 
 

Council Tool Pulaski Axe

  • Combination axe blade on one end and a mattock blade for digging or grubbing on the other end
  • Forged steel head, heat treated working ends produce fine grain structure and RC 45-55 Rockwell hardeness value for safety, edge holding and toughness
  • Hand sharpened, single bit edge and mattock blade
  • Double bit American hickory handle, with axe head hydraulically seated onto handle with a serrated aluminium wedge
  • Total length 0.9m with 11cm wide axe head and 8cm wide mattock head
  • Includes rubber sheath for blades
  • Weight 2.5kg
  • Made in USA by Council Tool Company
  • Click on image to see further details
Pulaski Axe$145.00 
  • Spare Parts for Pulaski Axe:
Pulaski/DB Handle (70-013)$30.00 
Pulaski Axe Sheath Only$35.00 
 

Council Tool Pulaski Axe FSS

  • Combination axe blade on one end and a mattock blade for digging or grubbing on the other end
  • Forged steel head, heat treated working ends produce fine grain structure and RC 53-58 Rockwell hardness value for safety, edge holding and toughness
  • Body coated with black enamel and the cutting edges in clear lacquer to deter rust
  • Hand sharpened, single bit edge and mattock blade
  • Top grade double bit American hickory handle, with eye section dried to below 10% moisture content to minimise shrinkage and axe head hydraulically seated onto handle with a serrated PVC wedge
  • FSS version - produced in accordance with US Forest Service Specification 5100-355E
  • Total length 0.9m with 11cm wide axe head and 8cm wide mattock head
  • Weight 2.5kg
  • Includes rubber sheath for blades
  • Made in USA by Council Tool Company
  • Click on image to see further details
Pulaski Axe FSS$210.00 
  • Spare Parts for FSS Pulaski Axe:
Pulaski Axe Sheath Only$35.00 
 

Council Tool Pulaski Axe FG Handle

  • Combination axe blade on one end and a mattock blade for digging or grubbing on the other end
  • Forged steel head, heat treated working ends produce fine grain structure and RC 45-55 Rockwell hardness value for safety, edge holding and toughness
  • Hand sharpened, single bit edge and mattock blade
  • Yellow clad style fiberglass handle. Traditional double bit shape. Construction is a pultruded structural fiberglass core with an injection molded jacket acting as an exterior body. The jacket is tough, durable engineered polymer. Extremely strong, non-conductive and non-corrosive
  • Axe head is joined to the handle with a strong resilient epoxy, forming a chemical and mechanical bond. The interior detail of the eye is tapered and allows for a strong mechanical bond
  • Total length 0.9m with 11cm wide axe head and 8cm wide mattock head
  • Weight 2.5kg
  • Includes rubber sheath for blades
  • Made in USA by Council Tool Company
  • Click on image to see further details
Pulaski Axe with FG Handle$145.00 
  • Spare Parts for FG Pulaski Axe:
Council Tool Pulaski FG Handle$55.00 
Pulaski Axe Sheath Only$35.00 
 

Council Tool Hookeroon

  • Professional hookeroon designed for moving logs, firewood and timber boards
  • Forged tool steel tapered pick head, hand sharpened and hydraulically seated onto handle and secured with a serrated aluminium wedge
  • Heat treated working ends produce fine grain structure and RC 45-55 Rockwell hardeness value for safety, edge holding and toughness
  • American hickory handle, with eye section dried to below 10% moisture content to minimise shrinkage and help prevent loosening
  • Total length 87cm with 12cm long hook. Weight 1.6kg
  • Made in USA by Council Tool Company
  • Click on image to see further details
Council Tool Hookeroon$130.00 
 

Logrite Cant Hooks

  • Strong aluminium handled cant hook for moving/rolling logs
  • Heat treated, zinc plated hook is built to last
  • Textured rubber grip on for comfort
  • Stronger, lighter and easier to use than wooden handle versions
  • Available in 42" (107cm) and 60" (152cm) lengths
  • The 42" model will grip logs in the 200-800mm diameter range and the 60" model will grip logs in the 250-900mm diameter range
  • Handle diameter 45mm
  • Weight 3.4kg (42") and 4.1kg (60")
  • Made in USA
  • Click on image to see further details
Logrite Cant Hook 42$245.00 
Logrite Cant Hook 60$300.00 
 

Logrite Peavey Hooks

  • Strong aluminium handled peavey hook for moving/rolling logs
  • Heat treated, zinc plated hook is built to last
  • Textured rubber grip on for comfort
  • Stronger, lighter and easier to use than wooden handle versions
  • Available in 42" (107cm) and 60" (152cm) lengths
  • The 42" model will grip logs in the 200-800mm diameter range and the 60" model will grip logs in the 250-900mm diameter range
  • Handle diameter 45mm
  • Weight 3.4kg (42") and 4.1kg (60")
  • Made in USA
  • Click on image to see further details
Logrite Peavey Hook 42$245.00 
Logrite Peavey Hook 60$300.00 
 

Logrite Log Stand

  • 15cm universal log stand attaches to Logrite peavey or cant hooks to raise one end of the log
  • Enables log cutting without having the chainsaw hit the ground - ideal for cutting firewood
  • Photo shows the log stand attached to Logrite peavey hook (peavey hook not included)
  • Made in USA
  • Click on image to see further details
Logrite Log Stand$85.00 
 

Granberg Alaskan Mill MKIII

  • The Alaskan Mill MKIII is an advanced timber mill, to be used in conjunction with an existing chainsaw
  • The MKIII clamps onto the chainsaw guide bar and is easily adjusted to produce exact timber thickness
  • Converts rough logs into perfectly dimensioned timber with an even re-sawn finish
  • Safe, easy-to-use and fast, the MKIII produces timber in thicknesses of 1/2"-13", widths of 24-36"(select 24", 30" or 36" model) and unlimited length
  • Available in 24", 30" and 36" models
  • Chainsaw is not included
  • Optional auxiliary oiler kit is available for larger bar chainsaws
  • Click on image to see further details
Alaskan Mill MkIII Kit 24$440.00 
Alaskan Mill MkIII Kit 30$460.00 
Alaskan Mill MkIII Kit 36$500.00 
  • Granberg Alaskan Mill Accessories:
Granberg Auxiliary Oiler Kit$140.00 
 

Granberg Slabbing Rail Brackets

  • For the greatest accuracy in milling with Alaskan Mk III or Small Log Mill, the initial cut must be smooth and level
  • A set of Slabbing Rail Brackets helps make the ideal guide for the mill to follow
  • Simply attach to 2 lengths of 2" x 4" timber (not included) to complete the guide rail system
  • Also includes screws and double-headed forming nails for securing the slabbing rail system to the log
  • Click on image to see further details
Granberg Slabbing Rail Brackets$85.00 
 

Granberg Alaskan Small Log Mill

  • The Alaskan Small Log Mill is an ideal mill for cutting small logs up to 16" diameter (approx 400mm)
  • Compact and lightweight design easily attaches to your chainsaw bar with no drilling required
  • Recommended for 70-90cc chainsaws with bars of 20" or less
  • Will slab in thicknesses of 1/4"-13" and unlimited length
  • Chainsaw not included
  • Click on image to see further details
Small Log Mill$330.00 
 

Granberg Mini Mill

  • Compact vertical milling attachment for chainsaws
  • Ideal partner as an edger to the Alaskan MKIII
  • Can also be sued to convert logs into timber
  • Includes 12" aluminium guide rail in 2" lengths (with screws) and a guide board with spikes to fasten to the log to complete the guide system
  • After the log is squared, the guide board may be adjusted to cut timber into any desired dimension
  • Designed for smaller chainsaws up to 60cc
  • Click on image to see further details
Mini Mill$240.00 
 

Log Volume Tables

  • Pocket and A5 size log volume ready reckoner for calculating the volume of logs based on centre diameter and log length
  • Tables of log volume in cubic metres from lengths between 1.5 and 15m in 0.3m increments and diameters between 15cm and 158cm
  • Spiral bound for ease of use
  • Pocket size is 11cm x 15cm, A5 size is 15.5cm x 21cm
  • Click on image to see further details
Log Volume Tables Pocket$30.00 
Log Volume Tables A5$30.00 
 

Council Tool Combination Tool

  • Combination pick and shovel tool with American Ash handle
  • Shovel blade and pick are made from tough, durable tool steels and component parts are fully heat treated for maximum toughness and wear resistance
  • Black enamel and phosphate finish resists rust
  • Multiple working positions enable the tool to be used as a shovel or as a pick, with position quickly adaptable
  • Total length 1.17m, weight 2.2kg
  • Shovel blade size 18cm long x 16cm wide
  • Pick size 16cm long x 2.5cm wide
  • Made in USA by Council Tool Company
  • Click on image to see further details
Combination Tool$210.00 
 

Slammer Tool

  • The Slammer is an industrial grade commercial multi-purpose tool that is a combination of a crowbar, axe, spade, mattock/grubber all in one. It is a two part slide hammer. The Slammer Tool uses the downward force of the inner bar to slam the cutting blade through dense soil conditions, root systems associated with well-established plants and hard materials
  • The high impact bissaloy blade is sharpened on all faces. Can cut soil, roots, concrete and rock. The tapered top of the blade is designed to allow you to walk out the blade after you have driven it deep into the soil
  • Made in Australia under licence from Slammer NZ
  • YouTube usage video here: https://www.youtube.com/user/theslammertool
     
  • PLEASE NOTE THESE SHIP DIRECTLY FROM THE MANUFACTURER IN MELBOURNE. CANNOT BE SHIPPED TO A PO BOX OR PARCEL LOCKER


  • Click on image to see further details
Slammer Tool$260.00 
 

Tree Popper

  • Designed to instantly remove woody weeds by levering the plant out of the ground at the base of the stem
  • Easy to use:
    - with the tread plate facing the operator, fill the jaw with the base of the plant stem (ie just above the soil surface)
    - pull the upper end of the lever and then push down to lift the plant out of the soil
  • Three sizes available:
    - Small: suitable for trees with stem diameters of 5-20mm
    - Medium: suitable for trees with stem diameters of 5-30mm
    - Large: suitable for trees with stem diameters of 5-50mm
  • The largest size achieves 10x the user's weight in leverage
  • Dimensions/weights:
    - Small: 1000x150x100mm, 3kg
    - Medium: 1100x250x100mm, 5.5kg
    - Large: 1440x350x100mm, 7.5kg
  • Made in South Africa
  • Click on image to see further details
Tree Popper Small$230.00 
Tree Popper Medium$330.00 
Tree Popper Large$360.00 
 

Tree Girdler

  • Easy to use handheld tool enables ringbarking unwanted trees in seconds
  • Special carbon steel blade cuts a 15mm wide grove through both the bark and cambium layers, deep enough to kill the tree
  • Cast aluminum handle and molded grip
  • Adjustable blade to to ringbark trees from 5cm to 90cm in diameter
  • Click on image to see further details
Tree Girdler$380.00  ETA 2/5
  • Spare Parts for Tree Girdler:
Tree Girdler Blade$80.00 
 

Council Tool Single Edge Brush Hook

  • Heavy duty brush hook featuring a 29cm sharpened blade attached to an American hickory handle
  • 5mm thick sharpened blade manufactured from high quality American steel, oil quenched for uniform hardness and straightness
  • Tempered for best edge-holding and toughness, and cutting edge is hand polished
  • Total length 104cm
  • Weight 2.25kg
  • Made in USA by Council Tool Company
  • Click on image to see further details
Brush Hook S/Side$120.00 
 

Council Tool Twin Edge Brush Hook

  • Professional heavy duty brush hook for clearing scrub and weeds
  • Precision machined 12 gauge tool steel blade
  • Long lasting, tempered cutting edge
  • Durable American Hickory handle
  • Total length 133cm; Blade size 30cmx12cm
  • Weight 2kg
  • Made in USA by Council Tool Company
  • A heavy duty rubber sheath for the blade is available as an accessory
  • Click on image to see further details
Brush Hook Double Edge$120.00 
  • Spare Parts for Brush Hook:
DE Brush Hook Handle$45.00 
Brush Hook Sheath$55.00 
 

Spear & Jackson Brushing Slasher

  • Brushing slasher ideal for thinning, trimming and cleaning brush and thickets
  • Epoxy coated head for rust resistance
  • Solid forged socket for handle
  • Weatherproofed hickory handle
  • Blade size 380mm, total length 1.3m, weight 1.6kg
  • Click on image to see further details
S&J Brushing Slasher$165.00 
 

Silky Yoki Brush Thinner

  • Heavy duty brush thinner for clearing work
  • 270mm high carbon steel blade
  • Genki rubber hand grip to remove shockwaves when striking
  • Includes nylon sheath
  • Total length 485mm
  • Weight 520g excluding sheath
  • Made in Japan
  • Click on image to see further details
Silky Yoki Brush Thinner$125.00  ETA 1/5
 

Gerber Brush Thinner

  • Heavy duty brush thinner for clearing scrub and weeds
  • Durable high carbon steel blade
  • Gator grip rubber handle resists slipping in wet conditions
  • Includes nylon sheath
  • Total length 49cm; Blade length 22cm
  • Weight 730g
  • Click on image to see further details
Gerber Brush Thinner$95.00 
 

Haglof Brush Axe

  • Heavy duty brush axe for clearing scrub and weeds
  • Swedish made cutting head/blade with US made Hickory handle
  • Razor sharp blade enables easy removal of saplings and weeds
  • Total length 70cm; Blade length 14cm
  • Weight 1.15kg
  • Click on image to see further details
Haglof Brush Axe$70.00 
  • Spare Parts for Brush Axe:
Brush Axe Blade$27.00 
 

Barnel Bush Machetes

  • Bush machetes featuring either 40cm (BM16) or 56cm (BM22) high carbon steel tempered blade
  • Ergonomic non-slip thermoplastic rubber grip
  • Total length: 54cm (BM16), 69cm (BM22)
  • Weight: 400g (BM16), 475g (BM22)
  • Includes cut resistant Cordura sheath
  • Barnel models BM16 and BM22




  • Click on image to see further details
Barnel BM16 40cm Machete$25.00 
Barnel BM22 56cm Machete$30.00 
 

Christmas Tree Pruning Knives

  • Brushking Christmas tree pruning knives for easily pruning lower new growth
  • Available with straight or serrated 41cm blades, made of high quality German stainless steel
  • Handles are made of high strength, lightweight timber
  • Total length: 67cm; weight: 210g
  • Optional leather sheath available for protection/storage
  • Due to varying conditions and the severe stress under which these knives are used, we cannot guarantee them against breakage
  • Click on image to see further details
Christmas Tree Knife - Str$135.00 
Christmas Tree Knife - Serr$140.00 
  • Accessories for Xmas Tree Knives:
Christmas Tree Knife Sheath$35.00 
 

Spear & Jackson Root Breaker

  • Forged 100mm wide heavy duty carbon steel blade for effectively cutting through tree roots
  • Tubular steel shaft for strength, and tilted ergonomic hilt for easier use
  • Handle length 910mm, weight 2.5kg
  • Spear & Jackson model 2422
  • Click on image to see further details
S&J Root Breaker$130.00 
 

Council Tool Mattock

  • Full size heavy duty Mattock/Pick featuring a 2.25kg head with a pointed pick on one side and 9cm wide mattock blade on the other
  • Ideal for shallow digging, trenching, cutting roots and breaking up soil/rocks
  • 2.25kg head is forged from American carbon steel, heat treated to produce fine grain structure and RC 40-47 (Rockwell hardness)
  • 92cm American hickory handle with eye section dried to below 10% moisture content
  • A well balanced tool that is easy to swing
  • Supplied as two pieces - head and handle. Simply slide head down handle and drop a few times onto hard surface from about 20cm height to secure head
  • Total weight 3.4kg
  • Made in USA
  • Click on image to see further details
Council Tool Mattock$110.00 
  • Spare Parts for Mattock:
Council Tool Mattock Handle (70-031)$45.00 
 

Council Tool Cultivator/Mattock

  • GroundHog cultivator/mattock
  • Small, one handed, light weight but heavy duty tool features a three-pronged rake opposite a digging head
  • Drop forged from US tool steel - one piece construction and balanced for comfort
  • American hickory handle encased with a vinyl grip
  • Total length 48cm, heads 8cm long x 5.5cm wide
  • Weight 760g
  • Made in USA
  • Every gardener needs one of these!
  • Click on image to see further details
Council Tool Cultiv/Mattock$48.00 
 

Council Tool Pick/Mattock

  • GroundHog pick/mattock
  • Small, one handed, light weight but heavy duty pick/mattock features a pick opposite a digging head
  • Drop forged from US tool steel and balanced for comfort with American hickory handle encased with a vinyl grip
  • Pick end is ideal for digging small holes for seedlings
  • Length 48cm
  • Made in USA
  • Every gardener needs one of these!
  • Click on image to see further details
Council Tool Pick/Mattock$48.00 
 

Council Tool Cutter/Mattock

  • GroundHog cutter/mattock
  • Small, one handed, light weight but heavy duty cutter/mattock features a cutter opposite a digging head
  • Drop forged from US tool steel and balanced for comfort with American hickory handle encased with a vinyl grip
  • Cutter end is ideal for cutting through roots/weeds
  • Length 48cm
  • Made in USA
  • Every gardener needs one of these!
  • Click on image to see further details
Council Tool Cutter/Mattock$48.00 
 

Council Tool Log Splitter

  • 3.6kg log splitting maul with 86cm American hickory handle
  • Forged US tool steel head with clear laquer finish to deter rust
  • Heat treatment of bit end produces fine grain structure and Rc 45-50 for safety and toughness
  • Flat end is designed for driving steel wedges when splitting logs
  • Hickory handle is kiln dried before turning. Eye section is then dried to below 10% moisture content prior to assembly
  • Handle is hyraulically inserted into head and secured with a serrated aluminium wedge, providing a very secure mechaincal bond
  • Total length 86cm, head 22.5cm long, cutting bit length 9.5cm, total weight 3.75kg
  • Made in USA
  • Click on image to see further details
Council Tool Log Splitter$110.00 
  • Spare Parts for Log Splitter:
Council Tool Log Splitter Handle (70-009)$35.00 
 

Council Tool Velvicut Felling Axe

  • A beautiful, handmade full size felling axe produced by Council Tool experienced axe artisans
  • Forged from 5160 grade alloy steel for strength, toughness, durability and ability to hold an edge
  • Heat treated and quenched to produce a hardening edge extending 1.5 inches up the bit for maximum edge holding. The edge is tempered to RC 50-54 to hold an edge without becoming brittle
  • Axe head is rough ground in a robotic work cell and sharpened by an experienced hand with increasingly fine abrasives and finished with leather stropping
  • Handle is made of grade "A" American hickory, mounted to the head with a softwood wedge crossed with a steel wedge for additional security
  • Leather sheath with buckle is included
  • All parts including sheath are made in USA
  • Total length: 87cm, blade length: 19cm x 12cm cutting edge, weight 2.4kg
  • Click on image to see further details
Council Tool Velvicut Axe$290.00 
  • Spare Parts for Velvicut Axe:
Velvicut Dayton Handle (70-012)$60.00 

 

Council Tool Velvicut "Bad Axe"

  • Modeled after the well-known “Boy Axe” of the US Forest Service, this beauty takes improved performance one step further
  • The Dayton patterned head features somewhat thicker cheeks than other axes in the marketplace. Its angle is approximately 25° but is slightly convex. This superlative design feature is preferred by many tool experts, including the US Forest Service. Its profile, in conjunction with its sharpness, provides a deep bite into wood without sticking. Each axe is hand-sharpened
  • The "Bad Axe" is a great mid-sized tool perfect for camping or to keep handy in a vehicle or at home. Small enough to split kindling but "BAD" enough to chop a small tree. Beware: this well-balanced axe arrives razor sharp
  • Forged using 5160 grade alloy steel, the bit is heat treated and quenched approximately 25mm from the cutting edge, then tempered for maximum edge holding and toughness. Final hardness Rc 52-56
  • 70cm handle (before assembly) is made from grade "A" American hickory and selected for grain orientation and density, making it strong, and mounted to head in the traditional manner using a softwood wedge crossed with a steel wedge for added security
  • Axe head is coated with light oil to prevent rusting. A Linseed oil coating is applied to protect the handle
  • Includes premium leather US made sheath
  • Total axe length 70cm, weight 1.3kg
  • Made in USA
  • Click on image to see further details
Council Tool Velvicut Bad Axe$240.00 
  • Spare Parts for Velvicut Bad Axe:
Velvicut Bad Axe Handle (70-007)$55.00 

 

Council Tool Velvicut Hudson Bay Axe

  • A beautiful, handmade Hudson Bay pattern axe perfect for camping, hunting or hiking
  • Forged from 5160 grade alloy steel for strength, toughness, durability and ability to hold an edge
  • Heat treated and quenched to produce a hardening edge extending 1 inch up the bit for maximum edge holding. The edge is tempered to RC 50-54 to hold an edge without becoming brittle
  • Axe head is rough ground in a robotic work cell and sharpened by an experienced hand with increasingly fine abrasives and finished with leather stropping
  • Relative to other patterns, the Hudson Bay has a very short eye length. This reduces the contact area between the head and handle, which can lead to looseness. Using a new and innovative design, the eye is pierced with a special punch forming ribs horizontally and vertically inside the eye. This creates more contact area and bite between the head to handle joint
  • Handle is made of grade "A" American hickory, mounted to the head with a softwood wedge crossed with a steel wedge for additional security
  • Leather sheath with buckle is included
  • All parts including sheath are made in USA
  • Total length: 45cm, blade length: 18cm x 10.5cm cutting edge, weight 1.15kg
  • Click on image to see further details
Council Tool Hudson Bay Axe$220.00 
  • Spare Parts for Hudson Bay Velvicut Axe:
Velvicut Hudson Handle (70-003)$50.00 

 

Council Tool Broad Axe

  • A mid sized tool sharpened in a center-cut style (both sides of the blade beveled) making it great for chopping or notching
  • Sometimes referred to as a carpenter’s axe or a ship builder’s axe
  • Forged USA tool steel head, with tempered bit hardness of Rc 48-55 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as-forged condition
  • Head coated with clear lacquer to deter rust
  • 28" curved American hickory handle, with eye section dried to below 10% moisture content to minimize shrinkage and help prevent loosening
  • Axe head is seated onto the handle in a traditional manner using a wooden wedge crossed with a metal wedge for added security
  • Premium USA-made leather sheath is included
  • All made in USA
  • Total length: 70cm, blade length: 18cm x 12cm cutting edge, weight 1.65kg
  • Click on image to see further details
Council Tool Broad Axe$110.00 
  • Spare Parts for Broad Axe:
Broad Axe Handle (70-005)$25.00 
 

Council Tool Double Bit Axe

  • Michigan pattern double bit axe with phantom bevels and a 36" straight handle
  • Phantom bevels -- or hollows -- are designed to reduce sticking and minimize burst wood chips
  • Hand sharpened double bits for cutting and splitting, sharpened in the same manner
  • Forged USA tool steel head, with tempered bit hardness of Rc 48-55 1-1/4 inches from the cutting edge
  • Natural steel finish on head and cutting edges coated in clear lacquer to deter rust
  • 36" double-bit American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening
  • Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content
  • The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2" of overall length of handle is removed during assembly
  • All made in USA
  • Total length: 87cm, each blade cutting edge length: 12cm, weight 2.15kg
  • Click on image to see further details
Council Tool Double Bit Axe$130.00 
  • Spare Parts for Double Bit Axe:
Pulaski/DB Handle (70-013)$30.00 
 

Freund Profiline 916 Axe

  • 74cm long professional axe
  • 12cm cutting edge on high quality C60 forged steel blade
  • Very light weight (1.6kg) due to special handle material, which is incredibly strong
  • 10 year guarantee
  • Made in Germany
  • Click on image to see further details
Freund 916 Axe$150.00 
 

Silky Ono Axe

  • Great small axe/hatchet for cutting small branches/firewood
  • Ideal for de-limbing or chopping/splitting wood
  • Forged steel alloy blade and Genki rubber hand grip to remove shockwaves when striking
  • Includes nylon sheath
  • Total length 300mm; Blade edge length 130mm; Blade length 120mm
  • Weight 790g excluding sheath
  • Made in Japan
  • Click on image to see further details
Silky Ono Axe$140.00 
 

Freund Profiline 907 Hatchet

  • 38cm long professional hatchet
  • 8cm cutting edge on high quality C60 forged steel blade
  • Very light weight (700g) due to special handle material, which is incredibly strong
  • 10 year guarantee
  • Made in Germany
  • Click on image to see further details
Freund 907 Hatchet$105.00 
 

Council Tool Camping Kit

  • Great heavy duty camping set
  • Includes:
    - Hudson Bay camp axe with leather sheath for clearing and cutting/splitting wood and kindling;
    - 1.2kg engineer hammer for hammering tent pegs/stakes;
    - Groundhog pick for digging/trenching the campfire and foraging;
    - 45cm pry bar for pulling up tent pegs and moving heavy objects
  • All made in USA
  • Click on image to see further details
Council Tool Camping Set$240.00 
 

Council Tool Camping Axe

  • Heavy duty camping axe with Hudson Bay axe head is ideal for light splitting, chopping, driving tent pegs etc
  • Forged tool steel head, hand sharpened and with a tapered bit for cutting and light splitting
  • Tempered bit hardness of 48-55RC extending 1.25 inches from bit edge
  • Head coated in black enamel and cutting edge in clear laquer to deter rust
  • 18" American hickory handle, with eye section dried to below 10% moisture content to minimise shrinkage and help prevent loosening. Approx 0.5-1 inch of the handle is removed during assembly
  • Axe head is hydraulically seated onto handle and secured with a serrated aluminium wedge. The serrated shape improves bite and the aluminium choice is strong, lightweight, and does not change size with moisture content
  • The interior detail of the eye is tapered and allows for a strong mechanical bond
  • Durable sheath with snap and belt slit is included
  • All made in USA
  • Click on image to see further details
Council Tool Camping Axe$90.00 

 

Barnel B1080 Camping Axe

  • 260mm long camping axe
  • High carbon steel blade with precision ground razor edge
  • Strong, durable ABS handle with synthetic rubber non-slip hand grip
  • Includes velcro sheath
  • Weight 600g
  • Barnel model B1080
  • Click on image to see further details
Barnel B1080 Camping Axe$42.00 
 

Council Tool Deluxe Honing Kit

  • Deluxe axe/knife honing kit includes one soft Arkansas and one hard Arkansas honing stone (each 130x40x12mm) and a bottle of honing oil
  • Oil the stones each time you use them - never try to use the stones dry
  • Supplied in wooden presentation/storage box
  • Made in USA
  • Click on image to see further details
Council Tool Deluxe Honing Kit$65.00 
 

Council Tool Honing Stone

  • Handy pocket honing stone supplied in a leather pouch
  • Stone is a Hard Arkansas for a keen polished edge and measures 80x25x6mm
  • Great to keep in your pack to keep your axe sharp after each use
  • Made in USA
  • Click on image to see further details
Council Tool Honing Stone$25.00 
 

Council Tool Steel Splitting Wedge

  • Drop forged from American high carbon steel
  • Correctly beveled around the "struck" face to deter chipping and cracking
  • Designed to split logs, firewood, stave and other wood products
  • Sharpened and ready to use, the wedge is beveled for efficient splitting and coated with a clear laquer
  • 24cm long, weight 2.35kg
  • When using wedges, always use a woodchopper maul or axe to make a starting notch. Wedges should be struck by a sledge hammer or woodchopper maul with a larger striking face than the struck face of the wedge
  • Eye protection must be worn
  • Made in USA by Council Tool Company
  • Click on image to see further details
Council Tool Splitting Wedge$55.00 
 

Large Leather Axe Head Cover

  • Large axe head guard is made from steer leather and suits axe blade edges up to 19cm long
  • Includes adjustable leather strap
  • Made in Australia
  • Click on image to see further details
Large Axe Head Guard$25.00 
 

Leather Axe Head Cover

  • Premium leather axe head guard fits axe blade edges up to 13.6cm long (5.4")
  • Adjustable leather strap to suit different head sizes
  • Made in USA
  • Click on image to see further details
Axe Head Cover$33.00 
 

Leather Hatchet Edge Cover

  • Premium leather hatchet edge cover fits hatchet or small axe blade with edges up to 11cm long (4.5")
  • Adjustable leather strap to suit different head sizes
  • Made in USA
  • Click on image to see further details
Hatchet Edge Cover$16.00 
 

Bush Regen Kit 1

  • Bush regeneration kit ready to go!
  • Contains 3 Pocket leather tool pouch, leather belt, Barnel B175 heavy duty pruners, Barnel B6301 narrow trowel and Mundial 15cm knife
  • Click on image to see further details
Bush Regen Kit 1$115.00 
 

Bush Regen Kit 2

  • Bush regeneration kit ready to go!
  • Contains 4 Pocket leather tool pouch, leather belt, Barnel B175 heavy duty pruners, Barnel B6301 narrow trowel, Barnel Z210 150mm Folding Saw and Mundial 15cm knife
  • Click on image to see further details
Bush Regen Kit 2$145.00 
 

Treefellers Toolbelt

  • Heavy duty Treefellers Toolbelt, includes 2 pouches for wedges with wedge remover straps to prevent jamming, first aid pouch and large can/chain pouch including leather file holder
  • All pouches have drainholes
  • Heavy duty YKK belt buckle
  • Available in tough polyester riveted construction or super strength Ripstop fabric
  • Made in New Zealand
  • Click on image to see further details
Treefellers Toolbelt - Polyester$100.00 
Treefellers Toolbelt - Ripstop$110.00